{
  "url": "https://proudtek.com/products/rfid-labels/impinj-m730-uhf-inlay/",
  "sourceUrl": "https://proudtek.com/products/rfid-labels/impinj-m730-uhf-inlay/",
  "title": "Impinj M730 UHF Inlay — Retail Source Tagging",
  "description": "This Impinj UHF inlay family (Monza R6 silicon class) is the volume retail workhorse of the M700 family — 96-bit EPC, ISO/IEC 18000-63 / EPC Gen2v2,...",
  "kind": "product",
  "imageUrl": "https://proudtek.com/landing-images/impinj-m700-uhf-inlay.jpg",
  "imageAlt": "Impinj M730 UHF RFID inlay — cost-optimised RAIN RFID Monza R6 chip for retail source tagging",
  "imageGallery": [
    {
      "url": "https://proudtek.com/landing-images/impinj-m700-uhf-inlay.jpg",
      "alt": "Impinj M730 UHF RFID inlay — cost-optimised RAIN RFID Monza R6 chip for retail source tagging"
    }
  ],
  "breadcrumbs": [
    {
      "name": "Home",
      "url": "https://proudtek.com/"
    },
    {
      "name": "Products",
      "url": "https://proudtek.com/products/all/"
    },
    {
      "name": "Impinj M730 UHF Inlay — Retail Source Tagging",
      "url": "https://proudtek.com/products/rfid-labels/impinj-m730-uhf-inlay/"
    }
  ],
  "summary": [],
  "faq": [
    {
      "question": "What is the difference between Impinj M730 and M750?",
      "answer": "M730 (Monza R6 class) is the cost-optimised variant: 96-bit EPC, no user memory, no EPC Gen2v2 AUTHENTICATE or Untraceable. M750 (Monza R6-P class) adds 32 bits of user memory + full AUTHENTICATE and Untraceable + Hide-EPC at ~30% silicon-ASP premium. Choose M730 for pure SGTIN-96 retail volume; choose M750 for brand authentication, retail-privacy at POS, on-tag user memory, or any cryptographic verification requirement."
    },
    {
      "question": "Is M730 the same chip as Monza R6?",
      "answer": "Yes — Impinj rebranded Monza R6 silicon as M730 under the M700-series naming refresh. Datasheets, EPC behaviour, and TID prefix (E280-1160) unchanged. Existing readers, encoders, and inlays branded as Monza R6 fully interoperable with M730 inlays."
    },
    {
      "question": "What read range can I expect from a Proud Tek M730 inlay?",
      "answer": "Free-air on a paper hangtag with Impinj R700 reader at +30 dBm EIRP: 8-10 m. Apparel hangtags: 6-8 m. On metal with foam-spaced specialty antenna: 1.5-2.5 m. On liquid (cosmetics / beverage) with foam-isolated label: 1.0-2.0 m. Pallet portal read rates: 98-99% on dense loads. Real numbers depend on antenna design, reader power, and deployment substrate. Always validate with on-site pilot before committing."
    },
    {
      "question": "Can M730 be used with my existing Impinj R700 / Zebra FX9600 reader fleet?",
      "answer": "Yes — fully ISO/IEC 18000-63 + EPC Gen2v2 compliant. Every standards-compliant fixed reader, handheld, and printer-encoder reads/writes M730 with no firmware change. The advanced EPC Gen2v2 commands (Untraceable, AUTHENTICATE, Hide-EPC) that M750 / UCODE 9 implement are not available on M730 — but basic inventory and read/write commands work identically."
    },
    {
      "question": "What MOQ does Proud Tek offer for M730 inlays?",
      "answer": "10,000 pieces for stock antenna designs (general-purpose far-field, compact retail, on-metal, on-liquid, windshield). For custom antenna designs MOQ is typically 50,000-100,000 pieces depending on tooling depth. Sample sets of 100-500 pieces available for evaluation; lead time 3-4 weeks for stock antenna designs, 6-10 weeks for new antenna tooling."
    },
    {
      "question": "Does M730 meet the Walmart RFID mandate?",
      "answer": "Yes — the dominant chip behind Walmart RFID source-tagging compliance. Walmart requires SGTIN-96 EPC encoding per GS1 TDS 2.0 with ARC Master List spec category certification on the inlay design. M730 + ARC-certified antenna meets both requirements. Walmart's mandate has expanded from apparel (2020) to home / electronics / beauty / hardline (2022-2024); M730 ships into all categories. Adjacent mandates (Target, Macy's, Inditex, Nike, Lululemon, Kohl's) accept the same M730 + ARC-certified-antenna stack."
    }
  ],
  "procurementFields": [
    {
      "label": "Best fit",
      "value": "Best for asset tagging, packaging, authentication, access control, and smart-label projects."
    },
    {
      "label": "Key options",
      "value": "Form Factor: Adhesive label format for direct application to objects or packaging."
    },
    {
      "label": "Customization",
      "value": "Confirm artwork, encoding, material, chip, and finish requirements before quoting."
    },
    {
      "label": "Quote checklist",
      "value": "Confirm mounting surface, adhesive or on-metal requirements, and expected reading distance. Adhesive label format for direct application to objects or packaging. Share target chip or protocol, quantity, format or size, print or encoding..."
    }
  ],
  "collectionGuidanceFields": [],
  "coreGuidanceFields": [],
  "articleGuidanceFields": [],
  "sourceLinks": [],
  "related": [],
  "productSpecs": [
    {
      "name": "Form Factor",
      "value": "Adhesive label format for direct application to objects or packaging."
    }
  ],
  "machineJsonUrl": "https://proudtek.com/machine/products/rfid-labels/impinj-m730-uhf-inlay.json",
  "machineTextUrl": "https://proudtek.com/machine/products/rfid-labels/impinj-m730-uhf-inlay.txt",
  "author": {
    "name": "Proud Tek Co., Limited"
  },
  "publisher": "Proud Tek Co., Limited",
  "credentials": [
    "ISO 9001:2015",
    "ISO 14001:2015",
    "RoHS Compliant",
    "CE Marking",
    "REACH Compliant"
  ],
  "generatedAt": "2026-03-16T01:42:30.697Z"
}